1-Coat Marine Grade Epoxy (Spray Grade)
Weatherskin’s One Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. Weatherskin’s One Coat Marine Epoxy is high solids, high build and will cure at temperatures as low as 10°F in the presence of moisture. This product is especially suitable for marine and water submerged applications. Typical uses include, but aren’t limited to: Barges, drilling rigs, pools, truck bays, car washes, public restrooms, locker rooms, non-potable tank interiors, heavy duty structural, piping and any substrates requiring a high wash cycle finish.
HAPS CONTENT
Ultra low HAPS Content – 2.72 grams /gallon.
VOC CONTENT
Ultra low VOC Content – 45 grams/gallon.
HIGH BUILD
High build single coat application.
SPRAYING POT-LIFE
Extremely long pot-life for spraying (6 hours).
MOISTURE
Cures in the presence of moisture.
TEMPERATURES
Cures in temperatures as low as 10°F / -12.2°C.
WATER SUBMERSION
Designed for water submersion.
AIRLESS PAINT SPRAYER
Spray applied with airless paint sprayer.
WEATHER RESISTANCE
Designed for extreme weather resistance.
WATER TABLE
Use above and below water table.
UV RESISTANCE
Designed with incredible UV resistance.
BARRIER PROPERTIES
Excellent corrosion and water barrier properties.
ADHESION
Excellent adhesion to metal and concrete.
TIME OF APPLICATION
Drastically decreases time of application.
STANDARD COLORS
Standard colors available.
CUSTOM COLORS
Custom colors available on request (longer wait times)
Product Color Charts Sheet (pdf)
DownloadEnd Slips | Non-Slip Agents · Epoxy Coatings
Serving Washington DC, Maryland, & Virginia
Copyright © 2025 End Slips Inc - Owned by Balfour Hamilton LP. All Rights Reserved.